11BPX DMSS PWM11ch 2K

Brand: JR-PROPO
Listed part number:11BPX DMSS PWM11ch 2K
Availability: Availability confirmed in your offer

Price on request

Product overview

・DMSS2.4GHzシステムを用いPWM11chの出力ポートとXBus専用出力を3ポート搭載したハイブリッドシステム・デュアルバッテリーシステム搭載。接続した2個のバッテリーの電圧を監視しバランスよく電源を切り替え電源消費の偏りを防ぐ高効率システム・DMSS用サブレシーバーRA03TLを2個搭載しデュアルレシーバーシステムを構築・電子スイッチ搭載・最大60Aの電流容量・イージーバインドシステム搭載・12Vスーパーハイボルテージ対応※本製品にはレギュレーター機能はありません。12Vバッテリーを使用する際は必ずサーボも12V対応サーボをご使用ください。スペック品名: 11BPX寸法: 2.36 x 2.83 x 0.58 in / 60 x 72 x 14.5…

Description

Technical details and documents

11BPX DMSS PWM11ch 2K is a JR-PROPO DMSS radio transmitter prepared for quote-based sourcing through Fly Supply.

Key product details

Manufacturer: JR-PROPO
Model/reference: 11BPX DMSS PWM11ch 2K
Official product group: Receivers
Official manufacturer source: https://www.jrpropo-jp.com/product-page/11bpx-dmss-pwm11ch
Confirm the exact JR-PROPO radio, receiver, servo, model-aircraft platform, installation space, and connector orientation before ordering.
Check the latest JR-PROPO documentation for setup, firmware, binding, wiring, voltage, and programming requirements that apply to the target aircraft or helicopter.
For transmitters, verify DMSS compatibility, channel count, stick mode, gimbal preference, battery/charger needs, receiver pairing, telemetry requirements, and local radio compliance.
For receivers, confirm DMSS binding compatibility, PWM/XBus channel requirements, antenna layout, telemetry support, power input, redundancy plan, and installation location in the aircraft.
Online prices are intentionally not published; availability, configuration, and final quotation are confirmed by request.

Fly Supply recommends reviewing the complete JR-PROPO setup, including transmitter, receiver, servos, XBus components, telemetry sensors, power routing, and required spares, before purchasing this product.

Manufacturer reference: https://www.jrpropo-jp.com/product-page/11bpx-dmss-pwm11ch

Ordering note: Request this item using reference 11BPX DMSS PWM11ch 2K so Fly Supply can verify the exact configuration, current availability, supporting documents, and application fit before supply.