Lamar X61-0028

Product image unavailable.

  • Brand: Lamar Technologies
  • Listed part number:X61-0028
  • Catalogue reference:AT-58187488493899
  • Availability: Availability confirmed in your offer

Request a quote for this item

Price on request

Overview & ordering

Prepare your enquiry using the listed model and reference. Include intended use, quantity and required accessories so we can review the appropriate item and configuration.

What to include in your enquiry
  • Complete part reference and quantity
  • Required date and document requirements

Pricing, configuration, availability and scope of supply are confirmed in your offer.

Help with selection or configuration
Technical details and documents
Switches, Relays & Control Devices — Lamar Technologies. Ordering reference: X61-0028.

Product family information:
Lamar Technologies X61-0028: 12 V continuous-duty contactor, 100 A DC continuous, SPST normally open, 600 A DC inrush, 200 A DC breaking, coil 0.8 A.

Lamar Technologies X61-0028 is a 12 V continuous-duty contactor rated at 100 A DC continuous current. Lamar's data sheet specifies a single-pole, normally open copper contact, a maximum inrush current of 600 A DC, a maximum breaking current of 200 A DC and an electrical life of 50,000 cycles at rated load. The 12 V coil has a resistance of 14.5 Ω and draws 0.8 A in continuous duty, with pull-in at 8.0 V DC maximum and drop-out at 4.5 V DC maximum.

The metal housing is not grounded: battery positive and load connect to the two high-current studs, the switch and ground to the two coil studs, and current flow on both pairs is reversible. The mounting slots are 2.3 in (58 mm) apart. Lamar Technologies is a Hartzell Engine Tech brand, and Hartzell lists the contactor as aviation grade without FAA-PMA approval. Fit depends on the aircraft type and the P/N of the contactor being replaced.

Which posts take the battery, load, switch and ground wires on the X61-0028?
Battery positive goes to one large stud and the load to the other; the switch goes to one small coil stud and the other coil stud goes to ground. Lamar's diagram marks them A, B, C and D, and current can flow either way through both pairs. The coil studs are 10-32.

What torque do the X61-0028 terminal nuts take?
The Lamar label on the contactor gives 10–15 in-lb (1.1–1.7 N·m) for the small coil posts and 35–45 in-lb (4.0–5.1 N·m) for the large current posts. Lamar publishes no torque for the mounting bolts; those follow the aircraft's maintenance data.

Is the X61-0028 a continuous-duty or a starter-type intermittent contactor?
Continuous duty: the coil draws 0.8 A and may stay energised, and the contacts carry 100 A DC continuously, with 600 A inrush and 200 A breaking. Lamar's 12 V intermittent unit is the X61-0030: 25 % duty, at most 5 minutes on, 900 A inrush, 300 A breaking, coil 2.9 A. The aircraft's approved data define which duty a position needs.

Price, supply condition and availability are confirmed in our quotation. Product photographs may represent the family; confirm the selected configuration.

Technical documents

Technical reference specifications
Order unit each
Product type Switches, Relays & Control Devices
Specification Data Family-level technical data; selected options are listed separately. Current draw: 0.8 A (14.5 Ω) Specification: SPST NO, 100 A DC continuous, 600 A DC inrush, 200 A DC breaking Voltage: 12 V
Catalog ordering reference X61-0028
Product condition New
Published product identification Cert: MfrCoC