16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K

16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K

16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K is the specific JR-PROPO catalog item under manufacturer part number 16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K. This page refers to the exact model or configuration named above; final compatibility, included components, approval basis, and documentation should be confirmed against that identifier before ordering.

Exact product identification

• Manufacturer: JR-PROPO
• Product: 16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K
• Part number / SKU: 16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K

16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K is a JR-PROPO DMSS radio transmitter prepared for quote-based sourcing through Fly Supply.

・DMSS2.4GHzシステムを用いPWM11chの出力ポートとXBus専用出力を16ポート搭載したハイブリッドシステム・XBUSのサーボ設定がよりスムースに行えるよう回路設計を刷新・デュアルバッテリーシステム搭載。接続した2個のバッテリーの電圧を監視しバランスよく電源を切り替え電源消費の偏りを防ぐ高効率システム・DMSS用サブレシーバーRA03TLを2個搭載しデュアルレシーバーシステムを構築・電子スイッチ搭載・最大60Aの電流容量・イージーバインドシステム搭載・12Vスーパーハイボルテージ対応※本製品にはレギュレーター機能はありません。12Vバッテリーを使用する際は必ずサーボも12V対応サーボをご使用ください。【注意】バッテリーと受信機の間にレギュレーターを接続してのご使用はお止めください。 スペック品名: 16BPX-PRO寸法: 2.36 x 3.54 x 0.65 in / 60 x 90 x 16.5 mm重量: 4.23 oz / 120 g動作電圧: 12.6V以下通信方式: DMSS 2.4GHz接続ポート: PWM/11ports･XBUS/16Ports

Key product details

• Manufacturer: JR-PROPO
• Model/reference: 16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K
• Official product group: Receivers
• Official manufacturer source: https://www.jrpropo-jp.com/product-page/16bpx-pro-dmss-pwm11ch-xbus16-receiver-2k
• Confirm the exact JR-PROPO radio, receiver, servo, model-aircraft platform, installation space, and connector orientation before ordering.
• Check the latest JR-PROPO documentation for setup, firmware, binding, wiring, voltage, and programming requirements that apply to the target aircraft or helicopter.
• For transmitters, verify DMSS compatibility, channel count, stick mode, gimbal preference, battery/charger needs, receiver pairing, telemetry requirements, and local radio compliance.
• For receivers, confirm DMSS binding compatibility, PWM/XBus channel requirements, antenna layout, telemetry support, power input, redundancy plan, and installation location in the aircraft.
• For XBus accessories, confirm bus topology, port count, PWM conversion requirements, power distribution, programming method, servo layout, and receiver compatibility.
• Online prices are intentionally not published; availability, configuration, and final quotation are confirmed by request.

Fly Supply recommends reviewing the complete JR-PROPO setup, including transmitter, receiver, servos, XBus components, telemetry sensors, power routing, and required spares, before purchasing this product.

Manufacturer reference: https://www.jrpropo-jp.com/product-page/16bpx-pro-dmss-pwm11ch-xbus16-receiver-2k

Ordering note: Request this item using reference 16BPX PRO – DMSS PWM11ch+XBUS16 RECEIVER 2K so Fly Supply can verify the exact configuration, current availability, supporting documents, and application fit before supply.