T14 x 4 CNC machined gimbals black Pearl

T14 x 4 CNC machined gimbals black Pearl

T14 x 4 CNC machined gimbals black Pearl is the specific JR-PROPO catalog item under manufacturer part number T14 x 4 CNC machined gimbals black Pearl. This page refers to the exact model or configuration named above; final compatibility, included components, approval basis, and documentation should be confirmed against that identifier before ordering.

Exact product identification

• Manufacturer: JR-PROPO
• Product: T14 x 4 CNC machined gimbals black Pearl
• Part number / SKU: T14 x 4 CNC machined gimbals black Pearl

T14 x 4 CNC machined gimbals black Pearl is a JR-PROPO DMSS radio transmitter prepared for quote-based sourcing through Fly Supply.

Of Channels: True 14 Channels ■Servo Control: MAX 56 ■Modulation: DMSS (Dual Modulation Spread Spectrum) ■Band: 2.4GHz/FHSS ■Programming Features: Airplane, Sailplane, Helicopter ■Transmitter Battery Type: 6.4V 1400mAh Li-Fe ■Model Memory: 30 + SD memory card slot for unlimited model memory ■Neutral pulse: 1500μS 【 System includes 】 Li-Fe 6.4V 1400mAh 2S transmitter battery pack / NEC-A912 9.0V power adapter / Manual COMMONCOMMON 【 FUNCTION LIST 】 ・DUAL-RATE & EXPONENTIAL ・Limit Adjust1(GL Only) ・Sub Trim ・Reverse Switch ・Servo Speed ・Program Mixing: 6 systems ・TIMER: 2 Selections・MIXING MONITOR ・SERVO MONITOR 【 SYSTEM LIST 】 ・30-model internal memory ・Model data copy & erase・Model Type Select: 3types ・Model Name: 8 characters ・Flight Mode Name ・Trim System ・Stick Position Switch ・Trim input Switch ・Stick Alert・Transmitter Setting ・LCD back light ・Servo Hold Warning ・Stick Calibration ・Trainer ・Bind and Range Check ・Telemetry System ・All Servos Hold ・Device Select・Swash type ・Wing Type ・Fail safe ・Throttle Stick Direction ・Stick Mode 【 ETC 】 ・My list ・Touch select function ・Telemetry indication: Customs sub-info.

Key product details

• Manufacturer: JR-PROPO
• Model/reference: T14 x 4 CNC machined gimbals black Pearl
• Official product group: Radio systems
• Official manufacturer source: https://www.jrpropo-jp.com/product-page/t14-x-4-chrome-with-cnc-machined-gimbals-black-pearl
• Confirm the exact JR-PROPO radio, receiver, servo, model-aircraft platform, installation space, and connector orientation before ordering.
• Check the latest JR-PROPO documentation for setup, firmware, binding, wiring, voltage, and programming requirements that apply to the target aircraft or helicopter.
• Online prices are intentionally not published; availability, configuration, and final quotation are confirmed by request.

Fly Supply recommends reviewing the complete JR-PROPO setup, including transmitter, receiver, servos, XBus components, telemetry sensors, power routing, and required spares, before purchasing this product.

Manufacturer reference: https://www.jrpropo-jp.com/product-page/t14-x-4-chrome-with-cnc-machined-gimbals-black-pearl

Ordering note: Request this item using reference T14 x 4 CNC machined gimbals black Pearl so Fly Supply can verify the exact configuration, current availability, supporting documents, and application fit before supply.